Hydroponic Magni Tec
Growth Accelerator
Click on image to enlarge
This device is claimed to affect the
polarisation of nutrient molecules and the water they are dissolved in making it easier
for the plants to take up nutrients. It is also said to reduce the build up of deposits in
pipes and tanks. It is also said to help control algae.
Magni tec growth accelerator
XXXX Y716
Porous Pipe
Click on image to enlarge
Porous pipe is made in England from
reconstituted car tyres. It works efficiently at 0 5bar (7'/2 psi.) Porous pipe does not
work at high pressure At 0 5bar water slowly soaks into the growing medium (i.e soil,
sand, capillary matting, etc) along the whole length of the pipe at a rate of
approximately 2 litres to 4 litres per metre per hour Maximum of 50 metres in any one run
(100 metres if water is supplied from both ends). Water penetrates through the soil
between 30cm-45cm either side of the pipe, depending on the soil type and condition.
Porous pipe can either be laid on the surface or buried. Porous pipe is compatible with
all barbed & hose fittings size 16mm. Actual bore size is about 1/2".
Porous pipe £2.25 a metre
XXXX
Y710 100m roll £125
XXXX Y711
Plastic Irrigation Pipe
Click on image to enlarge
Plastic irrigation pipe
Diameter length price
6mm (dripper) 100m £18.00 XXXX
Y765A
6mm (dripper) 20m £4.50 XXXX Y766A
12mm 200m £59.00
XXXX Y767A
12mm 10m £9.00
XXXX Y768
16mm 200m £70.00
XXXX Y769
16mm 10m £6.00
XXXX Y770
20mm 200m £110.00
XXXX Y759
20mm 5m £4.50
XXXX Y760
25mm 100m £85.00
XXXX Y761
25mm 5m £8.00
XXXX Y 762
32mm 100m £129.00
XXXX Y763
32mm 5m £12.50
XXXX Y764
Pipe Fittings and Connectors
12mm barbed elbow
£0.40 XXXX Y765
12mm barbed tee £0.63 XXXX
Y766
12mm barbed connector £0.40 XXXX Y767
12mm flow control tap £1.90 XXXX Y738
12mm barbed end plug £0.40 XXXX Y739
12mm non return valve £3.55 XXXX Y740
12mm inline filter £9.00 XXXX
Y747
16mm barbed elbow £0.45 XXXX
Y741
16mm barbed tee £0.51 XXXX
Y742
16mm barbed connector £0.45 XXXX Y743
16mm flow control tap £1.87 XXXX Y744
16mm barbed end plug £0.45 XXXX Y745
16mm non return valve £3.90 XXXX Y746
16mm inline filter £9.30
XXXX Y668
20mm barbed elbow £0.45 XXXX
Y669
20mm barbed tee £0.52 XXXX
Y670
20mm barbed connector £0.45 XXXX Y671
20mm flow control tap £1.95 XXXX Y672
20mm barbed end plug £0.50 XXXX Y753
20mm non return valve £3.95 XXXX Y754
20mm inline filter £9.70 XXXX
Y755
20mm tank connector £0.90
XXXX Y756
reducer 16mm to 12mm £0.50 XXXX Y757
reducer 20mm to 16mm £0.50 XXXX Y758
Professional Hole Punch
Click on image to enlarge
For inserting drippers etc into
plastic pipe
XXXX Y752
All drippers and associated fittings
are fitted either in the end of dripper pipe(6mm) or inserted into the side of any size
pipe using the low cost orange hole punch XXXX Y392 or the unit shown above Y752
Octa mitter 0-40 Litres per hour adjustable
XXXX Y389
4 outlet manifold (creates4x6mm takeoffs)
XXXX Y788
online button dripper 2L/hour
XXXX Y789
online button dripper 4L/hour
XXXX Y790
arrow dripper 2L/h (stake type)
XXXX Y791
insert nipple (to create a 6mm take off)
XXXX Y792
insert nipple tee (to create 2x6mm take off)
XXXX Y793
Pressure compensated dripper 2L/hour
XXXX Y794
Pressure compensated dripper 4L/hour
XXXX
Y795
Stake to support dripper tube
XXXX Y796
Plastic Nutrient Tanks
Click on image to enlarge
8 gallon 18"x12"x12"
with lid XXXX Y771
15 gal 20"x15"x18" with lid XXXX Y772A
25 gallon 27"x20"x20" with lid
XXXX Y773
50 gall 64"x18"x19" with lids XXXX Y7001
100 gallons 64"x26"x23" with lids XXXX Y7002
Tank Ball Valve and Float
Click on image to enlarge
For Above tanks
XXXX Y776
XXXX Y776
